Front Panel
Front Panel
- 8 Button Tactile Raised keypad:
Mode, Select, Enter, Escape, Up, Down, Left, Right
- Blue Translucent LCD:
20 character by 2 row
- Front Panel Host LED’s:
Power, Alarm, Link, Busy, MPE
- Front Panel LEDs:
Out (Alarm, ASI, GigE, CA)
DTA-3150 Specific
In (2 - ASI Ports, DVB-S 3 Port and Lock , DVB-S 4 Port and Lock, DVB-T 5 Port and Lock, DVB-T 6 Port and Lock)
DTA-3154 Specific
In (2 - ASI Ports, DVB-T 3 Port and Lock , DVB-T 4 Port and Lock, DVB-T 5 Port and Lock, DVB-T 6 Port and Lock)
ASI Inputs
- ASI x 2 (BNC)
- 188 or 204 Byte mode
- SPTS or MPTS
- 211 Mbps per input
- 256 PIDs per input
- Fill scrubbing on input
- Input Modes
Auto (Remap all services)
Manual (Add/Drop/Remap PID/Services)
Pass (Pass all services as-is)
MHP Injector
SI Injector
QPSK Inputs (Satellite)
3150 (2) 3154 (0)
- QPSK
- Antenna Input
L-Band Input 950 – 2150 MHz
- Input Level
-65 dB to –25 dB
- LNB Power
Automatic Polarity Sensing
(Horizontal - 14V-Vertical - 18V)
Automatic Over and Under Current Protection
22 KHz Tone
(High Frequency Block Up-convert)
DiSEqC
- Symbol Rate
2 to 45 MS/s
- Forward Error Correction (Physical)
DVB Viterbi FEC
Automatic Sensing
1/2, 2/3, 3/4, 5/6, 7/8
Reed Solomon (16 bits)
- 188 or 204 Byte mode
- SPTS or MPTS
- 72 Mbps per input
- 256 PIDs per input
- Fill scrubbing on input
- Modes
Same as ASI
Redundancy
- 1+1 IP and ASI
- ASI x 2 (BNC inputs for auto switch)
- No external controller required
DVB-T Inputs (Terrestrial)
3150 (2) 3154 (4)
- COFDM x 2 (Type F Female)
- Antenna Input
UHF: 470 MHz to 862 MHz
VHF: 174 MHz to 230 MHz
- Input Level
-88 dB to –20 dB
- Channel Bandwidth
6, 7 or 8 MHz
- Channel Assignment
CCIR Channel and +/- 166.666 KHz offset
- Functional
2k and 8k carrier non hierarchical and hierarchical
(DVB-T and DTG compliant)
- Modulation Modes
QPSK, 16 QAM, 64 QAM
- Guard Interval Modes
1/32, 1/16, 1/8, ¼ active symbol duration
Automatic Sensing
- Forward Error Correction (Physical)
DVB Viterbi FEC
Automatic Sensing
1/2, 2/3, 3/4, 5/6, 7/8
- 188 or 204 Byte mode
- SPTS or MPTS
- 72 Mbps per input
- 256 PIDs per input
- Fill scrubbing on input
- Modes
Same as ASI
|
Outputs
- Gigabit Ethernet
SPTS over UDP or RTP
MPTS over UDP or RTP
150 Mbs
Very low jitter
Output Options
- ASI (model is DTA 3150-ASI)
Mirrored (BNC x 3)
Byte or Burst Mode
54 Mbs Byte
211 Mbs Burst
Jitter less than 150 (nS)
Table Processing
- No Tables
- MPEG Tables
PAT
CAT (if CA is enabled)
PMT
- DVB Tables (Add/Drop/Remap DVB Services)
NIT
SDT
TDT/TOT
EIT
- ATSC Tables (Add/Drop/Remap ATSC Services)
VCT (Cable or Terrestrial)
MGT
STT
RRT
EIT (1-4)
• DCII Tables (Add/Drop/Remap Digicypher services to DVB or ATSC)
IP Data Encapsulation (ISO 13818-6 MPE)
- EN 301 192 Encapsulation of IP Datagrams over
- Unicast and Multicast Support
- 32 Routes
- 32 PIDs
IP Data de-capsulation (ISO 13818-6 MPE)
- EN 301 192 de-capsulation of IP Datagrams
- 16 PiDs
- 300 Mbs
Conditional Access Encryption
- DVB-Common Scrambling Algorithm (CSA)
- DVB Simulcrypt TS 103 197 v 1.2.1 and SCTE
OpenCAS™ DVS-278 compliant
- FIPS 140-2 hardware based random number generator (RNG)
- Advanced Encryption Standard (AES)
Adtec Open Secure Transport (OST)
IP based encryption for use with Adtec IRDs
IP Set Top and Computer compatibility
- Current 3rd Party CA Vendors include:
CSA:
Irdeto
Conax
EuroCAS
KeyFly
Xcrypt
AES:
Verimatrix
Host Platform
- PowerPC
- Adtec optimized Linux Kernel
- 10/100 Ethernet RJ-45 (Eth 0)
- 10/100/1000 Ethernet RJ-45 (Eth 1)
- Serial Port (RJ-48)
- USB 2.0 (2)
- IEEE 1394 (Firewire)
- N.C. / N.O. Tally Interface
- XML Configuration
- HTTP, FTP, Telnet, IP Logging, DHCP,
(XCP Adtec encrypted layer 3 protocol)
Power
- 70-240 VAC switching power supply
- 50/60 Hertz
- Rated at 94 Watts return nominal usage 20 watts
Physical
- 19” wide, 1.75” tall, 16” deep, (483 x 44.5 x 406 mm)
- 1 Rack Unit
- Weight 13lbs.
Environmental
- Active cooling (Push pull Fans)
- Operating: 0 to +50 degrees C
- Storage: -30 to +65 degrees C
- Less than 70% RH
- Non-Condensing
|
Data Sheet
